Graphite Compound Gasket

1.specification: standard or according to customer's requirement 2.Chinese Standard, ANSI, DIN, and JIS or be Non-standard.

Graphite Compound Gasket

Products Introduction: Graphite compound gasket is also called reinforced graphite gasket or strong graphite gasket, which perforates from reinforced graphite sheet or cut. The product has properties of anti corrosion, anti high-low temperature, good compression resilience and high strength. Inner lining reinforced material of reinforced graphite gasket has ss304, ss316 or tin flat, the thickness is 0.1~0.127mm. There is sprint sheet reinforcement, trawl sheet reinforcement and flat sheet reinforcement. Main material is reinforced graphite 304. We can make various kinds of geometry of circles gasket, which are widely used in pipeline, valve, pump, pressure container, heat exchanger, condensator, dynamo, air bells compressor, vent-pipe and chiller. Graphite reinforced gasket can be cut into complex shape gasket, for example, water level meter gasket, punching flange gasket and cylinder gasket of automotive diesel.

Strongest graphite gasket can be processed the following types according to application requirements:1.General Type Graphite Compound Gasket2.Graphite Compound Gasket with Inner Edge3.Graphite Compound Gasket with Outer Edge4.Graphite Compound Gasket with Inner and Outer Edge.

Characteristics: Graphite compound gasket edge form not only keep original gaskets all excellent properties, but also easy to install and dismantle. Its not easy to damage, which can prevent medium eroding gasket and improve anti pressure. General edge material is 304 or 316 stainless steel.

Main Technical Parameter of Strongest Graphite Compound Gasket:

Reinforced Material	Pressure Resistance(N/mm2)	Temperature		Rompression Ratio(%)	Resilient Rate(%)
		In No-oxy-gum State	In Oxidation State
Carbon Steel Sprint Sheet	≥4.8	-10-450	-10-550	30-35	15-20
SS304,SS316Sprint Sheet	≥4.8	-240-450	-200-600	30-35	15-30
SS304,SS316Flat Sheet	≥4.8	-240-450	-200-600	30-40	10-15
Ss304,Trawl Sheet	≥4.8	-240-450	-200-600	40-50	15-20

Increase Material	Ventilation Property(cm3/min)(Thickness 1.5mm\)	Sealing Property(Thickness 1.5mm)		Sealing Constant
		N2 m1/hr	Bumming Oil A m1/hr	"M" Factor	"Y" Preloaded Specific Stress
Carbon Steel Sprint Sheet	<=0.8	30	<0.5	30	9000
SS304,SS316Sprint Sheet	<=0.8	60	<0.5	25	4000
SS304,SS316Flat Sheet	<=0.4	35	<0.5	20	900
Ss304,Trawl Sheet	≥1.0	70	<0.5	30	5000

     Because of the different practical working conditions, the parameters above are only for reference.

Specification: Standard or according to customers requirements

Packing: Inner PVC, outer carton, or according to customers requirements

Remark: We can produce products of Chinese Standard, ANSI, DIN, and JIS or be Non-standard.

Graphite Compound Gasket